DP2x Sigma digital camera is a relatively minor update to the current model DP2s Sigma, which was announced in February 2010, and also an update for the Sigma DP2. The goal is a Sigma DP2x compact digital camera fixed, like its predecessors, which, in close collaboration with the Sigma DP1 original model used. The main differences between the DP2, DP2s, and the generation DP2x the original DP1 that the choice of lenses and image processors.
If the original had a DP1-28mm equivalent (now 16.6 mm), maximum aperture of F/4.0 lens that focuses the nearest 12.2 "/ 30cm, to replace the DP2 series cameras, this time with a little "less wide (24.2 mm actual) 41 mm equivalent lens, which is a maximum aperture of f/2.8 and can focus to 11" / 28cm. All Cameras Sigma DP series instead of the lens in front of a near-size APS-C (0.98 "/ 24.9 mm) diagonal Foveon X3 image with 14.1 million photodiodes to measure 7.8μm full RGB color information for each pixel of the image. DP2x Sigma always has a maximum size of 4.64-megapixel image. As the first DP2x DP2s Sigma Sigma DP2 and includes the "TRUE II" image processing engine instead Sigma true original ("Three-layer engine last nerve"), DP1 camera series processor. Sigma TRUE II processor is designed to provide improvements in processing speed, operation and performance of the original processor as TRUE.
Changes in the comparison and Sigma DP2 DP2s DP2x, especially in their firmware and software can be found, although we are aware of changes in hardware. According to Sigma, the design includes an analog front end DP2x image in its pipeline, such as the SD15 and DP1x first. That the company will allow the DP2x "to reflect the high-definition images and colorful." Sigma also notes that even if the autofocus algorithms DP2x has improved, but it is not clear, it is designed to previous models of the comparison. (The DP2s also said to have an improved AF algorithm, it is possible that this change is made on the same or that the algorithms have been optimized.)
As DP2s Sigma DP2x allow shooting to ISO 3200 equivalent, but only in raw mode, where the original DP2 had an upper limit set by ISO 1600 in RAW mode. (All three cameras can ISO 50-800 equivalent in JPEG mode.) The only other difference you will notice that we can find in the product specifications, no rate is only continuous frames is listed with DP2x this specification will probably still tied up today.
Prices and availability are DP2x Sigma has not announced yet.
Sponsored
If the original had a DP1-28mm equivalent (now 16.6 mm), maximum aperture of F/4.0 lens that focuses the nearest 12.2 "/ 30cm, to replace the DP2 series cameras, this time with a little "less wide (24.2 mm actual) 41 mm equivalent lens, which is a maximum aperture of f/2.8 and can focus to 11" / 28cm. All Cameras Sigma DP series instead of the lens in front of a near-size APS-C (0.98 "/ 24.9 mm) diagonal Foveon X3 image with 14.1 million photodiodes to measure 7.8μm full RGB color information for each pixel of the image. DP2x Sigma always has a maximum size of 4.64-megapixel image. As the first DP2x DP2s Sigma Sigma DP2 and includes the "TRUE II" image processing engine instead Sigma true original ("Three-layer engine last nerve"), DP1 camera series processor. Sigma TRUE II processor is designed to provide improvements in processing speed, operation and performance of the original processor as TRUE.
Changes in the comparison and Sigma DP2 DP2s DP2x, especially in their firmware and software can be found, although we are aware of changes in hardware. According to Sigma, the design includes an analog front end DP2x image in its pipeline, such as the SD15 and DP1x first. That the company will allow the DP2x "to reflect the high-definition images and colorful." Sigma also notes that even if the autofocus algorithms DP2x has improved, but it is not clear, it is designed to previous models of the comparison. (The DP2s also said to have an improved AF algorithm, it is possible that this change is made on the same or that the algorithms have been optimized.)
As DP2s Sigma DP2x allow shooting to ISO 3200 equivalent, but only in raw mode, where the original DP2 had an upper limit set by ISO 1600 in RAW mode. (All three cameras can ISO 50-800 equivalent in JPEG mode.) The only other difference you will notice that we can find in the product specifications, no rate is only continuous frames is listed with DP2x this specification will probably still tied up today.
Prices and availability are DP2x Sigma has not announced yet.